senotherm® CLASSIC defines standards

The product line senotherm® CLASSIC incorporates a wide range of conventional coating solutions. With a guaranteed “genuine” temperature resistance of up to 600 °C, senotherm® CLASSIC products don’t just protect from corrosion but also remain stable in colour. Their ease of use as well as their support of all conventional coating systems maximises their process reliability and economic efficiency within the whole manufacturing process. For diverse requirements in surface and colour, the CLASSIC series also offers a wide range of colours and metallics. So the individual products of the CLASSIC product line offer a suitable solution for nearly every visual requirement.  

This is how senotherm® CLASSIC defines standards for quality, visual diversity, process reliability and economic efficiency.


Advantages at a glance

genuine temperature resistance
up to 600 °C

excellent colour stability

optimum corrosion protection

a wide range of colours and surfaces

market leader in Europe for
over 50 years 

easy, user friendly handling

fast drying

less need for pre-treatment

no sandblasting necessary

available worldwide

worldwide service throughout the whole manufacturing process

a wide range of colours and surfaces matching touch up paint from a can

 senotherm® from  
the can
 >>>

 

 


Technical Facts

Product line senotherm® CLASSIC
Product series 1030 1666 1664 1111
Basis solvent based
Components one
Properties High process reliability, a wide range of colours and effects
Details Decorative coating with a brilliant, hard surface, available in a wide variety of colours Classic high temperature coating with high process reliability Classic high temperature coating with high process reliability; high solid Classic high temperature coating with high process reliability; various colours; high solid
Theoretical coverage approx 11 m²/kg at 25 µm dry film thickness approx 8 m²/kg at 20 µm dry film thickness approx 11 m²/kg at 25 µm dry film thickness approx 9 m²/kg at 25 µm dry film thickness
System one coat one coat (2 coat with zinc dust primer for corrosion protection)
Drying oven drying,
min. 15' 180 °C
air and oven drying
Hardening at 250 °C in a stoving oven or when first heated
Recommended film thickness 25 +/- 5 µm 20 +/- 5 µm 25 +/- 5 µm
Solids approx 35 – 55 % approx 28 % approx 55 % approx 50 %
Temperature resistance up to 400 °C (depending on colour) 500 °C 600 °C
Aerosol lines 1021 1644 1102
Minimum substrate requirement In general: free of grease, corrosion and impurities
Minimum pre-treatment requirement degrease
Colours (more colours may be possible on request) Brown metallic, Deep metallic black, Green, Blue, Nickel, Cast grey, Light cast grey, Black, Silver, White Deep metallic black, Cast grey, Light cast grey, Black, Silver Brown metallic, Deep metallic black, Green, Blue, Nickel, Cast grey, Light cast grey, Black, Silver, White
Product information PDF-Icon PDF-Icon PDF-Icon PDF-Icon
Processing instructions   PDF-Icon PDF-Icon PDF-Icon