senotherm® UHT – It’s a Non-Smoker®

The senotherm® UHT product line includes smoke free, solvent reduced coating systems and offers proof of a guaranteed sustainable solution. As final hardening takes place at room temperature, the end customer doesn’t have the inconvenience of smoke and odour when first using an appliance. So senotherm® offers an ideal solution to the end customers’ ever increasing sensitivity to health and environmental awareness. As usual, senotherm® UHT provides the highest quality standards. With “genuine” temperature resistance up to 600 degrees, the products protect against corrosion and are stable in colour. Unlike conventional coating systems, senotherm® UHT products are significantly more robust for transport and final assembly as final hardening of the coating takes place at room temperature (18-23°C).

So the senotherm® UHT range of products sends out a clear message for achievable sustainability both during the production process and end customer use.


Advantages at a glance

Non-Smoker® Coating

no unpleasant smoke and odour for the end customer

genuine temperature resistance
up to 600 °C 

excellent colour stability

optimum corrosion protection

a wide range of colours and surfaces

significantly more robust for transport and final assembly

final hardening at room temperature 

overspray can be disposed of economically as conventional commercial waste

available worldwide

worldwide service throughout the whole manufacturing process

a wide range of colours and surfaces matching touch up paint from a can

the solution to end customers’ ever increasing sensitivity to health and environmental awareness


 senotherm® from  
the can
 >>>

 

 


Technical Facts

Product line senotherm® UHT
Product series 1155 1157
Basis solvent reduced
Components one
Properties Smoke and odour free even when first heated, high level of surface hardness
Details Hardening at room temperature
Non-Smoker® Coating
Faster drying and harder, tougher surface
Non-Smoker® Coating
Theoretical coverage approx 9 m²/kg at 25 μm
dry film thickness
System one coat (optionally 2 coat with zinc dust primer for superior corrosion protection)
Drying and hardening Air drying; forced drying is possible up to 70 °C max
Recommended film thickness 25 +/- 5 μm
Solids approx 45 %
Temperature resistance 600 °C
Aerosol lines 1102
Minimum substrate requirement In general: free of grease, corrosion and impurities
Minimum pre-treatment requirement degrease sandblast
Colours (more colours may be possible on request) Brown metallic, Deep metallic black, Green, Blue, Nickel, Cast grey, Light cast grey, Black, Silver, White
Product informationen PDF-Icon PDF-Icon
Processing instructions PDF-Icon PDF-Icon