senotherm® UHT-HYDRO

senotherm® UHT HYDRO – Always stays a step ahead

senotherm® UHT HYDRO incorporates the first purely waterbased, high temperature resistant coating solutions (up to 600°C) that dry and harden completely at room temperature.  With UHT-HYDRO, senotherm® is bringing to the market a technological innovation and a genuine vision for the future of high temperature coatings. The surface is noticeably smoother, harder and more sustainable than the usual coating solution, so that UHT-HYDRO delivers the highest quality surface.  As a Non-Smoker® Coating it’s guaranteed to be smoke and odour free on first use.  
What’s more, with UHT-Hydro, senotherm® underlines its position as technology leader and delivers a real high performer.  This makes senotherm® UHT HYDRO the cleanest and highest quality solution for the future.

The advantages at a glance

  • technological innovation and a real vision for the future
  • the first purely waterbased high temperature coating systems
  • genuine temperature resistance  up to 600 °C
  • excellent colour stability
  • optimum corrosion resistance
  • highest quality surface, user convenience and durability
  • Non-Smoker® Coating
  • no troublesome smoke or odour for the end customer
  • significantly more robust during transport and final assembly
  • final hardening at room temperature  (18-23 °C)
  • a wide range of colours and surfaces
  • the energy and cost intensive stoving process during manufacture can be dispensed
  • overspray can be disposed of economically as commercial waste
  • worldwide availability
  • worldwide service throughout the whole manufacturing process
  • matching touch up paint from a can
PDF

senotherm® UHT-HYDRO (PDF)

(3 MB)

Technical Facts

Product series:

3590

Details: 
Fast drying waterbased, smoke and odour free when first heated, extremely high surface hardness

Components:
two

Theoretical coverage:
approx 9 m²/kg at 25 μm dry film thickness

System:
one coat

Drying & hardening: 
Air drying,  forced drying is possible up to max 70 °C

Recommended film thickness: 
25 +/- 5 μm

Solids:
approx 53 %

Temperature resistance: 
600 °C

Minimum substrate requirement: 
In general: free of grease, corrosion and impurities

Minimum pre-treatment requirement: 
sandblast

Product information:
PDF-file

Processing instructions:
PDF-file

2860

Details: 
Fast drying waterbased, smoke and odour free when first heated, extremely hard glossy surface available in a variety of decorative effects and bright colours

Components:
three

Theoretical coverage:
approx 9 m²/kg at 25 μm dry film thickness

System:
one coat

Drying & hardening: 
oven drying, 10 – 15 min. bei 100 – 80 °C

Recommended film thickness: 
30 +/- 5 μm

Solids:
approx 53 %

Temperature resistance: 
400 °C

Minimum substrate requirement: 
In general: free of grease, corrosion and impurities

Minimum pre-treatment requirement: 
sandblast

Product information:
PDF-file

Processing instructions:
PDF-file

senotherm® spray cans

learn more

Contact us

Alexander Renz

Division Manager

Phone: +49 6471 315 247
E-Mail: a.renz@weilburger.com

WEILBURGER Coatings GmbH
Ahäuser Weg 12-22
35781 Weilburg
Germany

Andrea Magnoni

Sales Manager

Phone: +39  035  438  2011
Fax: +39 035  438  2099
E-Mail: magnoni@weilburger.it

WEILBURGER Coatings ITALIA S.p.A.
Via degli Artigiani
24039 Sotto il Monte (BG)
Italy

Belemir Yetis

Managing Director

Phone: +90 212 871 09 76 - 77
Fax: +90 212 871 09 78
E-Mail: b.yetis@weilburger.com.tr

WEILBURGER Kaplama Ürünleri Ltd.Şti
Adnan Kahveci Mahallesi Yavuz Sultan Selim Bulvarı Perlavista A Blok No:1/A Kat:2 D:9
Beylikdüzü/ISTANBUL
Turkey

Bob Worrel

Sales Manager

E-Mail: r.worrell@weilburger.com

WEILBURGER North America Inc.
3824 Cedar Springs Rd#801-9346
Dallas, TX 75219

USA